logo

λεπτομέρειες για τα προϊόντα

Created with Pixso. Σπίτι Created with Pixso. προϊόντα Created with Pixso.
Ελεγκτής ESP
Created with Pixso.

S800 I/O DO828 3BSE069055R1 125V d.c. / 250V a.c. relay output module

S800 I/O DO828 3BSE069055R1 125V d.c. / 250V a.c. relay output module

Ονομασία μάρκας: ABB
Αριθμός μοντέλου: DO828
Τροποποιημένο: 1
τιμή: Negotiations
Λεπτομέρειες
Τόπος καταγωγής:
Ελβετία
Εκτιμημένη τάση μόνωσης:
50V
Διηλεκτρική τάση δοκιμής:
500VAC
Τρέχουσα κατανάλωση +5 Β Modulebus:
70mA
Διαρροή εξουσίας:
1,6W
Συσκευασία λεπτομέρειες:
Νέο πρωτότυπο κουτί
Επισημαίνω:

S800 I/O relay output module

,

DO828 relay module 125V DC

,

3BSE069055R1 ESP controller module

Περιγραφή του προϊόντος
S800 I/O DO828 3BSE069055R1 125V d.c. / 250V a.c. relay output module
Product Attributes
Attribute Value
Rated Insulation Voltage 50V
Dielectric Test Voltage 500VAC
Current Consumption +5 V Modulebus 70mA
Power Dissipation 1.6W
Product Description
General Info
Type Digital Output
Signal specification 125 V d.c. / 250 V a.c., (5 - 125 V d.c. / 5 - 250 V a.c.), 2 A
Article number 3BSE069055R1
Number of channels 16
Signal type Relay (NO)
HART No
SOE No
Redundancy No
High integrity No
Intrinsic safety No
Mechanics S800
Detailed Data
Isolation Individually isolated, channel-to-channel and to circuit common
Maximum field cable length 600 meters (656 yards)
Rated insulation voltage 250 V
Dielectric test voltage 2000 V a.c.
Power dissipation Typ. 3.5 W
Current consumption +5 V Modulebus 45 mA
Current consumption +24 V Modulebus 80 mA
Current consumption +24 V external 0
Environment and Certification
CE mark Yes
Electrical safety IEC 61131-2
Hazardous Location C1 Div 2 cULus, C1 Zone 2 cULus, ATEX Zone 2
Marine certification DNV-GL
Protection rating IP20 according to IEC 60529
Corrosive atmosphere ISA-S71.04 G3
Climatic operating conditions 0 to +55 °C (Storage -40 to +70 °C), RH=5 to 95 % no condensation, IEC/EN 61131-2
Pollution degree Degree 2, IEC 60664-1
Mechanical operating conditions IEC/EN 61131-2
EMC EN 61000-6-4, EN 61000-6-2
Overvoltage categories IEC/EN 60664-1, EN 50178
Equipment class Class I according to IEC 61140; (earth protected)
Max ambient temperature 55 °C (131 °F), for vertical mounting in compact MTU 40 °C (104 °F)
RoHS compliance EN 50581:2012
WEEE compliance DIRECTIVE/2012/19/EU

The DO828 is an 16 channel 125V d.c. / 250V a.c. relay output module for the S800 I/O. The maximum output voltage is 125V d.c. / 250V a.c. and the maximum continuous output current is 2A. All outputs are individually isolated.

Each output channel consists of optical isolation barrier, output state indication LED, relay driver, relay and EMC protection components.

The relay supply voltage supervision, derived from the 12 V distributed on the ModuleBus, gives an error signal if the voltage disappears, and the Warning LED turns on. The error signal can be read through the ModuleBus. This supervision can be enabled/disabled with a parameter.

Features and Benefits
  • 16 channels for 125V d.c. / 250V a.c. relay outputs
  • 16 isolated channels
  • Output status indicators
  • OSP sets outputs to predetermined state upon error detection